Raised Edge Conveyer Belt

Product Introduction

Product Detail：

Product Introduction

Corrugated wall with large tilt angle from base-band, ribs, diaphragm 3 parts. Wall to prevent the material from sliding measuredrole. For the convenience of bypassing the drum, the stall designed wavy edge; diaphragm is the role of supporting materials, in order to achieve large angle transmission, the use of T-TC type. File edges and cross-partition is the second sulfide methods and base-band connectivity, a high joint strength.

According to the performance of different plastic cover is divided into ordinary-type, heat-resistant type, flame retardant type, cold type, acid type, such as oil-based.

Main Characteristics

1. Because of large angle transporting,thus can be shortened the horizontal length and save the space of laying area.

2. Compared with common conveyor belt,with large carrying cross section,has stronger transporting capacity than same width conveyor belt.

3. Because without sidewall plate,thus avoid the local abrasion.

4. Impossible to use the traditional size of small roller.

5. Because the baseband uses special canvas core to improve the canvas,then improve the anti-broken ability of belt at the same time.

6. The sidewall plate and diaphragm are adhesive with baseband through heat vulcanization method,thus ensure the bonding strength.