KXT118Inclined shaft people and vehicles signal devices introduction.

Product Introduction

Product Detail：

KXT118Inclined shaft people and vehicles signal devices introduction.

Inclined shaft people and vehicles signal devices,the communication system adopts the inductive transmission mode, namely the dot extension or speech, radio wave radiation to induction line (straight bottom cable), by the high frequency machine, in the high frequency machine signal is processed into useful low-frequency signal, through a dedicated cable, transmitted to the host, display and voice, host calls start high frequency machine part of the work.Radio waves, through the induction line transmission to extension can realize two-way voice communication between the host and supporting.
RBI machine by receiving a communication signal, the host enables counting and display functions; also host a DC output signal to the controller, the controller can output a set of normally open contact signal, in order to achieve the appropriate roadway point bell control functions.

KXT118Inclined shaft people and vehicles signal devices technical parameters

（1）Working environment:　　
a)Ambient temperature:0℃～+40℃；　　
b)Average relative humidity: less than 95%（+25℃）；　　
c) Atmospheric pressure:80kPa～106kPa；　　
d)mechanical environment: No significant vibration and shock of the occasion; in the coal mine methane and coal dust hazardous compound, but no damage to insulation corrosive gases.
（2）Technical Specifications　　
a)Operating frequency: Emission (Host - Communication Machine) 1.650MHz; receiver (Communication Machine - host) 1.650MHz. 　　
b) Modulation: FM.  　　
c)Work: Wireless simplex intercom　　
d)Call mode: voice calls.　　
e)RF radiation Media: Sensor cables　　
f)Auxiliary host maximum distance: less than 200m.　　
g) device communications coverage:　　Horizontal: not less than 3 m. Longitudinal: not less than 500 m (with the aid of inductive line).