Hydraulic Wire Rope Cutter

Product Introduction

Product Introduction

Hydraulic Wire Rope Cutter made up of the end of the seat, seat plate, piston, piston rod, end caps, power, fixed knife, fixed knife block, cylinder, shell, pump, pump the heart, lift hand, O-ring, pulling arm and other parts composition, the use of hydraulic principles, down pushed the push hands, pushed the pump piston, with the piston protruding power cut.There are two models, one is the QY-30 Hydraulic Wire Rope Cutter, used to cut the rope diameter 30mm below. Another is QY-48 Hydraulic Wire Rope Cutter, used to cut the rope diameter is 48mm. As a professional cutting rope gadget.

Usage

Hydraulic Wire Rope Cutter cut the rope to reduce the labor intensity and improve working efficiency, suitable for shipbuilding, mining and other sectors. With styling, advanced structure, small size, light weight, reliable and convenient.

Using method

1、the cutting should be checked before each part of the structure is normal.

2、will need to cut the rope cut into the fixed knife seat, pull the bit arm trap-type front end of the arm rectangular boss.

3、clockwise tighten the oil return valve stem, and then press down pushed the hand, with the piston protruding knife for cutting wire rope, wire rope cut off, the oil return valve stem counterclockwise to unscrew themselves gradually knife returned.< /p>

Note

1、the product under different conditions of use, the working environment temperature is -5 ℃ --- +45 ℃ when using N15 machine oil, the working environment temperature -20 ℃ ---- 5 ℃ when using synthetic oil filter after the injection of the spindle, required to maintain a certain amount of oil, or fail to cut rope purposes.

2、does not apply to sour gas reduction or corrosion workplace.

3、the use of the process shall not be placed side-mounted position, upside down.

4、the product during use must be regularly checked based on usage.

Technical Parameter

Model                             QY30                      QY48                  

Max rope cutting dia      30mm                        48mm   

Piston process              ≥38mm                   ≥60mm  

Max cutting force           7.5T                           20T  

Fuel storage                 0.19L                         0.30L  

Grip force                    ≤25kgf                       ≤39kgf