PEX Stone Hammer Crusher
HomeProducts Center
- Mine Car & Construction Truck
- Belt Conveyor
- Scraper Conveyer
- Rock Loader
- Scraper Rock Loader
- Coal Mining Machine
- Road header
- Mine Car Dumper
- Shaking Table,Car Pusher
- Detritus Equipment
- Drilling Equipment
- Mine Drilling Machine
- Drilling Rod,Drilling Bits
- Water well drilling rig
- Rail Arrester
- Rail Transit Equipment
- Railroad tie
- Railway Maintenance Tools
- Railway Parts
- Track Switch
Large Equipment
Transportation Equipment
Supporting Equipment
Lifting Equipment
Guniting Equipment
Chemical Equipment
Mine Door
Rock Drilling Equipment
Ventilation&Guard Equipment
Safe&Protection Instrument
Pumping Equipment
Steel Products
Railway Materials
Explosion Proof Instrument
Electric Motor
Instrument And Meter
PEX Stone Hammer Crusher
Other Names:
Product Introduction PEX stone hammer crusher are applicable for various hard and fragile materials, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. The crushing compressive strength of materials should not be in excess of 150Mpa. The h
Related Products- info@bstchina.group
- 0537-7768777
- Please Leave a Message
Product Detail:
Product Introduction
Product Introduction
PEX stone hammer crusher are applicable for various hard and fragile materials, such as limestone, coal, salt, gypsum, alum, brick and tile, etc. The crushing compressive strength of materials should not be in excess of 150Mpa. The hammer crusher is mainly used in such industries as cement, coal separation, electricity generation, building mate.
Main Characteristics
Hammer crusher (hammer mill) is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc. The PC-Hammer crusher is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining,coal, metallurgic, construction material, road building, and chemical industries. the maximum, compressive resistance of the crushed materials can be up 150Mpa.
Operating Principle
Hammer crusher is the main working parts with a hammer (also known as hammer) of the rotor. Rotor from the spindle, disk, pin and hammer components. Motor drives the rotor speed in crusher cavity rotation. Material from the upper feed inlet into the machine, by the high-speed movement of the hammer blow, impact, shear, abrasive and grinding. In the lower part of the rotor, with sieve, crushing in less than sieve size fractions excreted through the sieve, sieve size larger than the coarse-grained material in the sieve retention continue to be a hammer blow and cut, and finally through sieve from the plane.
Technical Parameters
Type |
Rotor speed(r/min) |
Inlet size(mm) |
Maximum feed size(mm) |
Out size (mm) |
Capacity (t/h) |
Power(kw) |
Weigt |
Dimensions L×W×H(mm) |
Φ400×400 |
1500 |
145×450 |
100 |
0-30 |
5-8 |
7.5 |
0.9 |
844×942×878 |
Φ600×400 |
1000 |
295×450 |
100 |
0-35 |
10-12 |
18.5 |
1.03 |
1054×972×1117 |
Φ600×600 |
1000 |
295×570 |
100 |
0-35 |
12-18 |
45 |
2.14 |
1315×840×1501 |
Φ800×600 |
1000 |
350×570 |
120 |
0-45 |
20-25 |
55 |
2.45 |
1515×2586×1040 |
Φ800×800 |
1000 |
350×850 |
120 |
0-45 |
35-45 |
55 |
3.05 |
1515×2831×1040 |
Φ1000×800 |
1000 |
580×850 |
200 |
0-45 |
25-40 |
110 |
6.5 |
3206×2210×1515 |
Φ1000×1000 |
1000 |
580×1060 |
200 |
0-45 |
40-80 |
132 |
7.59 |
3514×2230×1515 |
Φ1250×800 |
750 |
650×850 |
200 |
0-45 |
20-50 |
132 |
11.7 |
2630×1780×2050 |
Φ1250×1250 |
750 |
650×1330 |
200 |
0-45 |
90-110 |
185 |
13.2 |
2630×2180×2050 |
Φ1400×1400 |
750 |
1050×1540 |
250 |
0-45 |
120-170 |
280 |
17.2 |
2790×2800×2310 |
Φ1600×1600 |
600 |
1500×1785 |
350 |
0-60 |
220-280 |
450 |
22.8 |
3350×3120×2660 |
Product Feedback
History Feedback: (0)
Latest Feedback