DYF-5 split hydraulic Rama
HomeProducts Center
- Mine Car & Construction Truck
- Belt Conveyor
- Scraper Conveyer
- Rock Loader
- Scraper Rock Loader
- Coal Mining Machine
- Road header
- Mine Car Dumper
- Shaking Table,Car Pusher
- Detritus Equipment
- Drilling Equipment
- Mine Drilling Machine
- Drilling Rod,Drilling Bits
- Water well drilling rig
- Rail Arrester
- Rail Transit Equipment
- Railroad tie
- Railway Maintenance Tools
- Railway Parts
- Track Switch
Large Equipment
Transportation Equipment
Supporting Equipment
Lifting Equipment
Guniting Equipment
Chemical Equipment
Mine Door
Rock Drilling Equipment
Ventilation&Guard Equipment
Safe&Protection Instrument
Pumping Equipment
Steel Products
Railway Materials
Explosion Proof Instrument
Electric Motor
Instrument And Meter
DYF-5 split hydraulic Rama
Other Names:
Hydraulic Rama Rama is an alternative to the traditional idealized new tools. Easy to operate, effort, subject to site constraints, the Rama compact, flexible, light weight, small size, easy to carry, suitable for factories, repair place.
Related Products- info@bstchina.group
- 0537-7768777
- Please Leave a Message
Product Detail:
Product Introduction
Range of application
Hydraulic Rama Rama is an alternative to the traditional idealized new tools. Easy to operate, effort, subject to site constraints, the Rama compact, flexible, light weight, small size, easy to carry, suitable for factories, repair place.
working principle
Hydraulic rama is hydraulic starting lever directly move forward, so the push rod itself does not make the turn.Hook claw seat can be made directly with the thread pitch forward and back, as long as the operation after a slight swing handle, hydraulic actuating lever forward, corresponding hook claw back, the object is pulled out.
Using method & Note
1、using the slotted end of the handle when the first set into the oil return valve stem and valve stem oil return tighten clockwise.
2、the hook claw adjust to hold on the pulling objects.
3、he handle into the lift hand hole piston actuating lever forward tilt back and forth smoothly forward, claw back accordingly, an object to be pulled out.
4、starting piston rod of hydraulic Rama effective distance is only 50mm, so the use of extended distance not greater than 50mm, pulled out when there is no stopping, release the oil return valve, so that the piston rod is retracted starting to go after a good tune second repeat steps 1,2,3 times out so far.
5、purports to retract the piston rod starts to go, simply use the slotted end of the oil return handle counterclockwise slightly unscrew the valve stem, the piston rod in the spring under the starter gradually retraction.
6、prior to use should be based on the outside diameter of the object is pulled, pull away and load force, select the appropriate tonnage hydraulic Rama, avoid overloading, to avoid damage.
7、hydraulic Rama use temp at -5 ℃ ~ 45 ℃ , the use of (GB443-84) N15 machine oil; at -20 ℃ ~ -5 ℃, the use of (GB442-64) synthetic spindle oil.
8、in order to prevent equipment damage caused by overloading, overloading hydraulic unit equipped with automatic unloading valve, when the object is pulled over the rated load, overload valve will automatically unloading and instead use a larger tonnage hydraulic Rama.
Technical Parameter
Model DYF-5 DYF-10 DYF-20 DYF-30 DYF-50 DYF-100
Safe load T 5 10 20 30 50 100
Stroke mm 100 125 120 150 100 160
Three claw adjust scope mm 50-250 50-300 100-450 200-500 250-600 250-650
Pump rated pressure MPa 63 63 63 63 63 63
Product Feedback
History Feedback: (0)
Latest Feedback