Cradle

Cradle

Other Names:

Product Detail: Cradle product introduction Cradle for a swing rail, end around a fixed axis swing, the other end when the cagestops after lap in the edge of the tip guide cage lining, edge then the tank and vehicletrack, convenient car cage. When the c

Related Products

Product Detail:

Product Introduction

 

Product Detail

Cradle product introduction

Cradle for a swing rail, end around a fixed axis swing, the other end when the cagestops after lap in the edge of the tip guide cage lining, edge then the tank and vehicletrack, convenient car cage. When the cradle is lifted, a security clearance enoughcradle on the most prominent part shape and tank cage. Shake left between the tip ofthe front end, when working with the tank rail liner lap, shaking the tip is hinged on thearm, can be free to rotate a certain angle, rolling pointed tail is provided with a counterweight, which are often up front. When the accident of shake down, the tankcage shake down, rotating tip head bump, and allow the cage safety through. Shakestructure tip and guide lining ensures the cradle and the cage of lap, lateral reliablepositioning, thereby cage inside and outside the track will not misplace, avoid car down accident.

Operating mechanism cradle is disengaged form, with no fixed connection. When the hydraulic cylinder piston rod extends out, push the crank pulley to swing, and guarantee the rocker can stable is lifted state, when the hydraulic cylinder piston rodis retracted, the rocker arm to fall, the front wave lapped on the edge of the tip guidecage lining. In order to prevent the rocker arm drop impact too hard or emergencymanual control, can adjust the weight block position and quantity. The maincharacteristic of this structure is the cradle of lap in the cage on the edge of the cageafter, due to changes in the elastic deformation of the wire rope load and lifting,rocker arm can swing with cage without hindrance the accident occurred. When therocker arm down, cage under the direction of two can be, and will not cause significant damage. CCTC plate chain trolley machine complete machine operation equipment mainly for mine various hoisting on and off field loading and unloadingtramcar and single or group transportation vehicle, tramcar meet pawl push, pull clawreaming car axle. The plank chain trolley machine complete machine operation equipment for combined a series of products, its form, size and main technical performance parameters with high standardization, plank chain trolley machine level.Exercise in the cage shaft yard handling car car equipment, can realize the cage for loading, unloading, location, transportation and other functions, can cancel the car pusher, a tank resistance pull device two sets of equipment, realize multi use of one machine. The plank chain trolley machine complete machine operation equipmentincludes: the plank chain trolley machine, roll table, car arrester, security door, the plank chain trolley machine complete car equipment, hydraulic system of plank chain trolley machine complete operating vehicle equipment electronic control signal deviceand other components.

 ()Plate chain pusher plate chain feeder is plate chain trolley consists of a list of tracks on the composition, the pin shaft is arranged at the bottom chain board trolleyequidistant in length, plate chain is installed on the car using the pawl and pawl pushpull claw, tramcar meet, the pull claw acting on the car axle or baffle. The cart ishinged and the tail end of the push plate chain trolley claw, pushing claw lifting car tocar to push forward; and the tail end of the plate is hinged chain trolley cart for the pull claw, the pull claw installed a wheel, when the wheel after orbit fixed Rev claw curvedrail, the pull claw lift automatically, pull off its head car axle forward. Operating device to push or pull claw claw in car along the direction after touch down, plate chain trolleyrunning from the car below.

Cradle technology parameter

Model specification Gruge( mm) Rocker arm length(mm) Import vehicle center side shaft rail surface high elevation(mm) Adjust height(mm) Equipped with hydraulic cylinder      
YC6/0.8 600 800 800 75 150 G1
50,S=300
YC6/0.8 900 800 800   G1
50,S=300
YC6/1.0 600 1000 1000 100 200 G1
50,S=300
YC6/1.0 900 1000 1000   G1
50,S=300
YC6/1.5 900 1500 1500 150 300 G1
50,S=300
YC6/1.5 900 1500 1500   G1
50,S=300
YC6/2.3 600 2000 2000 200 400 G1
50,S=300
YC6/2.3 900 2000 2000   G1
50,S=300
YC6/2.8 600 2300 2300 250 500 G1
50,S=300
YC6/2.8 900 2300 2300   G1
50,S=300
YC6/3.0 600 2400 2400 300 600 G1
50,S=300
YC6/2.8 900 2400 2400   G1
50,S=300

Product Feedback

Average Star Rating:

History Feedback: (0)

Latest Feedback

    Star Rating:
    Contacts: *
    EMail: *
    Message: *
    Verification code:          
     
     
    客服中心

    客户服务热线

    0537-7768777


    展开客服