EBZ75 Mine Heading Machine
HomeProducts Center
- Mine Car & Construction Truck
- Belt Conveyor
- Scraper Conveyer
- Rock Loader
- Scraper Rock Loader
- Coal Mining Machine
- Road header
- Mine Car Dumper
- Shaking Table,Car Pusher
- Detritus Equipment
- Drilling Equipment
- Mine Drilling Machine
- Drilling Rod,Drilling Bits
- Water well drilling rig
- Rail Arrester
- Rail Transit Equipment
- Railroad tie
- Railway Maintenance Tools
- Railway Parts
- Track Switch
Large Equipment
Transportation Equipment
Supporting Equipment
Lifting Equipment
Guniting Equipment
Chemical Equipment
Mine Door
Rock Drilling Equipment
Ventilation&Guard Equipment
Safe&Protection Instrument
Pumping Equipment
Steel Products
Railway Materials
Explosion Proof Instrument
Electric Motor
Instrument And Meter
EBZ75 Mine Heading Machine
Other Names:
Product Detail： Product Introduction EBZ75 machine economic cutting rock hardness coefficient for f 5 or less, it has the appearance of EBZ55 machine size is small, the weight is moderate, grounding than the small, high system stability, reliable operat
Related Products- info@bstchina.group
- 0537-7768777
- Please Leave a Message
Product Detail：
Product Introduction
Product Detail：
Product Introduction
EBZ75 machine economic cutting rock hardness coefficient for f 5 or less, it has the appearance of EBZ55 machine size is small, the weight is moderate, grounding than the small, high system stability, reliable operation, underground transportation convenient, easy disassembling, etc. Also reserved two hydraulic anchor machine interface, without an additional pump station can support operations, support rate is high, and saves the cost.
Main Characteristics
EBZ75 machine through the scaling mechanism of cutting arm can make gun head telescopic 400 mm, the operation can effectively reduce the number of walking machine, makes the gun head in digging the lane column nest and repair help easier. In addition, the gun head out after cutting the maximum height of 4.2 meters, roadway height has better adaptability.
Technical Parameters
|
Parameter |
EBZ75 |
|
Dimension |
7.4×2×1.5m |
|
Shovel plate widthm) |
2m |
|
Weight(t) |
18.1t |
|
Cutting power(Kw) |
75Kw |
|
pump power(Kw) |
30Kw |
|
Locate the cutting maximum height(m) |
3.5m |
|
loading capacity (m3/min) |
2.5 m3/min |
|
Economic cutting stiffness coefficient(Mpa) |
f ≤5Mpa |
|
service voltage(t) |
660/1140V |
|
Ground pressure(Mpa) |
0.12 Mpa |
|
Locate the cutting area(m2) |
14.7 m2 |
|
Cutting head undercover(mm) |
200mm |
|
Cutting head expansion amount(mm) |
— |
|
Shovel plate top undercover(mm) |
200mm |
|
Wide positioning cutting the soles(m) |
4.2m |
|
To adapt to the tunnel slope(°) |
±16° |
|
hydraulic system pressure(Mpa) |
16 Mpa |
Product Feedback
History Feedback: (0)
Latest Feedback